Kramer Electronics WP-501 - Manual (Page 104)

K-Config – Adding Actions to a Trigger 99
9.1 General Instructions
The Action Editor area is divided in two. The list of available actions on the left and once an action is selected, a
specific action tab on the right.
For example, the Switcher Command action displays the following tab:
Figure 177: The Action Editor
Generally, actions are added to triggers via the Action Editor in a similar way:
1. Select the Trigger.
2. Select an action type.
3. Click the Add to List button.
The action is added to the trigger.
At any time you can move the action up or down the list, delete it or duplicate it using the icons above the action list.
At any time you can add delete or change a trigger. Note that in some cases it will affect other triggers.
i