Kramer Electronics WP-501 - Manual (Page 34)

K-Config – The Driver Manager – Getting Started 29
# Feature Function
1 Commands Hierarchy Button Set the Commands Hierarchy layout (see Section 5.3 )
2 Drivers Tree Button Click to access the Drivers Tree window and select a different driver
3 Driver Details The Driver Details area displays the vendor, device model and driver revision.
Device Type
– lets you select the typical device type from a drop down list. Each
device type relates to a set of command groups that are typical for that device
type. For example, Selecting DVD Player as the device type will include the
Power, Transport, Image and Setup group commands
4 Driver Settings: Serial Settings For serial connections, set the baud rate, data bits, parity and stop bits
5 Driver Settings: Ethernet Settings For Ethernet connections, set the IP address, port and protocol
6 Create PDF Summary Button Click to create the driver summary see Figure 46
7 Export Driver Button Export the driver setup
8 Command Names List Includes all the command types (Default / Non Default Shared and Non-shared)
9 OK button Click to approve changes
10 Cancel Button Click to cancel changes
11 Apply Button Click to apply changes
Figure 46 shows an example of a PDF driver details summary document:
Figure 46: Driver Details Summary PDF File