MSI X2-109 v1 - Manual (Page 34)

2-8 Driver Installation
Version 2.0 Copyright © 2006 by LSI Logic Corporation. All rights reserved.
2.2.5 Installing the SuSE Linux Enterprise Server 9 Driver
This section describes the fresh installation of the SuSE Linux Enterprise
Server 9 driver on a system with the Embedded MegaRAID Software
stack. Prepare installation disks with the driver image, then perform the
following steps to install the driver.
1. Create a RAID array using the MegaRAID BIOS Configuration utility.
(See
Chapter 3, “MegaRAID BIOS Configuration Utility.” )
2. Boot the system using the SLES Disk.
3. When the first screen appears, press F6 and select Installation on
the menu.
You are prompted for the diskette.
4. Insert the driver update diskette in the A:/ drive and press Enter.
5. Press OK. The following message appears:
LSI Soft RAID Driver Updates added.
6. At the menu, select the driver update medium and press the Back
button.
7. Continue the installation process and complete it.