MSI X2-109 v1 - Manual (Page 39)

Configuring Arrays and Logical Drives 3-5
Version 2.0 Copyright © 2006 by LSI Logic Corporation. All rights reserved.
Figure 3.2 Logical Drive Configuration Screen
8. Highlight RAID and press Enter.
The available RAID levels for the current logical drive are displayed.
9. Select a RAID level for the logical drive and press Enter.
10. (Optional) Change the drive’s default Write Cache and Read Ahead
policies (see Section 3.3, “Setting the Hard Disk Write Cache and
Read Ahead Policies” ).
11. When you have finished defining the current logical drive, select
Accept and press Enter.
12. Save the configuration when prompted, and press any key to return
to the Management Menu.
13. Initialize the new logical drive(s). (See Section 3.2.5, “Initializing
Logical Drives,” for detailed instructions.)
3.2.3 Using New Configuration and View/Add Configuration
When you select the New Configuration menu option, the CU deletes the
existing arrays and logical drives and replaces them with the new
configuration that you specify. The View/Add Configuration menu option
lets you view the existing configuration or add to the existing
configuration, if possible.
Caution: If you want to keep the existing data on the storage
configuration, use View/Add Configuration instead of New
Configuration.