TRITTON Cessna Yoke System Pro Flight - Manual (Page 5)

5
ENGLISH
INtroductIoN
The Pro Flight Cessna Yoke is designed to maximize realism by enabling accurate
turning motion and a vast number of button controls for PC flight simulation software.
Saitek and Cessna have teamed up to provide you with the most authentic flight
controls for your home cockpit. This product has been built using genuine design data
from the world’s most popular plane manufacturer. The Pro Flight Cessna Yoke works
with a wide variety of flight simulators, and functions perfectly with other products in the
Pro Flight Range.
Features:
• Realistic Cessna turning motion
• 8-way point of view hat switch
• 1 x 4-way rocker switch
• 5 x 2-way rocker switches
• 2 x single-function buttons
• Lever quadrant with 3 x levers and 3 x detent buttons
• 3-position mode switch
• Smart Technology (ST) Programming Software allows gamers to configure their
controls to suit their preferred gaming style, and to save the configurations as
personal profiles
INStaLLING tHE FLIGHt YokE aNd tHrottLE QuadraNt
First, fix the Flight Yoke to your table or desk by inserting the prongs of the mounting
clamp into the holes on the Yoke base and then tightening the screw mechanism until
the Yoke is firmly attached.
Be careful not to over-tighten the screw as you may damage the clamp.
Next, screw the mounting plate to the Throttle Quadrant using the four provided screws.
You can screw the plate to one of two sides of the Quadrant depending on how you