Relay distribution, How to send – Konica Minolta bizhub 4050 User Manual
Page 40
[PC-FAX Functions]
5-7
5.4
Sending a fax after specifying a relay station (Relay Distribution)
5
5.4
Sending a fax after specifying a relay station (Relay Distribution)
Relay distribution
The Relay Distribution function distributes a fax to the preset recipients using relay stations.
If you have created groups of a relay station and the other destinations by area, you can reduce the total com-
munication cost compared to the cost of broadcasting to all destinations. This function is useful when broad-
casting faxes to distant locations.
Tips
-
The destination machine (relay station) must have the F-code function.
-
This machine supports the function (relay distribution request) to send a fax to a relay station. This ma-
chine does not support the function (relay distribution) to use this machine as a relay station.
-
You need to check the registration number of the Relay User Box assigned to the relay station and the
password for relay distribution in advance.
How to send
1
In the [FAX Transmission Popup] window, select [Fax Mode Setting Details...].
The [Fax Mode Details] window opens.
2
Specify the recipient's relay folder.
% [SUB Address]: Enter the registration number of the Relay User Box.
% [Sender ID]: Enter the password for the relay distribution.
3
Click [OK].