Konica Minolta bizhub 4050 - Manual (Page 29)

4.3 Using the Power key 4
[Introduction] 4-4
4.3 Using the Power key
Press the Power key to switch this machine to Power Save mode.
You can select [Power Save] or [Sub Power OFF] as Power Save mode that is activated when the Power key
is pressed.
To configure settings: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Set-
tings] - [Power Save Key] (The default varies depending on the region the machine is used in.)
When using the Power key as a Power Save key
When the Power key is pressed, the status of this machine changes as shown below. Depending on how
long the Power key is pressed, the state of the power saving mode to be activated will differ.
Related setting (for the administrator)
- Press the Power key to select whether to switch to Low Power or Sleep mode.
To configure settings: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save
Settings] - [Power Save Settings] (Default: [Low Power])
- You can select whether Deep Sleep mode is activated to further reduce power use when this machine
is in Sleep mode. When the machine is in Deep Sleep mode, it will not return to Normal mode when the
user operates the Touch Panel. To return to Normal mode, press the Power key.
To configure settings: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save
Settings] - [Power Consumption in Sleep Mode] (Default: [Enabled])
Power key Status of
this ma-
chine Status of
LED Description
Short press Low Power
mode
(Default) Flash:
Blue Turns off the display of the Touch Panel to reduce pow-
er use.
This machine returns to Normal mode when it receives
data or faxes or when the user operates the Touch Pan-
el.
Sleep mode Flash:
Blue Provides a greater power saving effect than Low Power
mode. The time required to return to Normal mode is
longer than that from Low Power mode.
This machine returns to Normal mode when it receives
data or faxes or when the user operates the Touch Pan-
el.
Hold down Sub Power
OFF Light up:
Orange Provides a greater power saving effect than Sleep mode.
While the sub power is turned off, this machine can re-
ceive data or faxes, however, it cannot scan or print an
original.
If data or faxes are received while the sub power is
turned off, they are printed when the machine returns to
Normal mode.
To enable the machine to return to Normal mode from
the Sub Power OFF status, press the Power key again.