Konica Minolta bizhub 4050 - Manual (Page 40)

[Introduction] 6-6
6.2 Loading paper into the Manual Feed Tray 6
4
Hold the paper guide tab located at the left end, then move the paper guide to match the width of the
paper to be loaded.
5
With the side to be printed on facing up, insert the paper as far as possible into the feed slot.
% If paper is curled, flatten it before loading.
% For letterhead, load paper first from the top edge with the letterhead side facing up. For 2-sided
printing, load paper first from the bottom edge with the letterhead side facing down.
NOTICE
Load paper within the guide indicating the upper limit.
6
Align the paper guide to the paper size.
7
Change the paper type and paper size on the Control Panel. When loading custom sized paper, also
specify the paper size.
% To configure settings: [Utility] - [User Settings] - [Printer Settings] - [Paper Setting] - [Paper Tray] -
[Manual Feed]