Konica Minolta bizhub 4050 - Manual (Page 30)

[Introduction] 4-5
4.3 Using the Power key 4
When using the Power key as a Sub Power OFF key
When the Power key is pressed, the status of this machine changes as shown below. Depending on how
long the Power key is pressed, the state of the power saving mode to be activated will differ.
Power key Status of
this ma-
chine Status of
LED Description
Short press Sub Power
OFF Light up:
Orange Provides a greater power saving effect than Sleep mode.
While the sub power is turned off, this machine can re-
ceive data or faxes, however, it cannot scan or print an
original.
If data or faxes are received while the sub power is
turned off, they are printed when the machine returns to
Normal mode.
To enable the machine to return to Normal mode from
the Sub Power OFF status, press the Power key again.
Hold down ErP Auto
Power OFF Flash:
Orange This function provides a more significant power saving
effect than the Sub Power OFF mode, which is close to
the state where the main power is turned off.
In ErP Auto Power OFF mode, this machine cannot re-
ceive data or faxes, and also it cannot scan or print an
original.
To enable the machine to return to Normal mode from
the ErP Auto Power OFF status, press the Power key
again.