Page 21, Auxiliary attachment control lever – SkyTrak 6036 Operation Manual User Manual
Page 27
Page 21
6036/6036T
Auxiliary Attachment Control Lever
(See Figure 11)
The auxiliary attachment control lever controls the
functions of an optional attachment that is mounted to the
vehicle and requires a hydraulic supply for operation.
Some of the optional attachments that require auxiliary
hydraulics are: Side Tilt Carriage, Mast, Broom, Auger,
and Swing Carriage.
When the control lever is moved to the right it
will provide hydraulic system pressure through
the female disconnect coupling for the auxil-
iary attachment. Hydraulic fluid will return to
the tank through the male disconnect coupling.
OH0381
AUXILIARY ATTACHMENT
CONTROL LEVER
Auger Operation:
• Lever right .......... auger dig
• Lever left ............ auger retract
Mast Operation:
• Lever right .......... forks raise
• Lever left ............ forks lower
Broom Operation:
• Lever right .......... broom rotates forward
• Lever left ............ broom rotates backward
Swing Carriage Operation:
• Lever right .......... swing right
• Lever left ............ swing left
Figure 11
OH0431
OH0451
The control lever will provide the following typical functions
for each specific attachment if they are connected properly.
Operation will be reversed if incorrectly connected. We
recommend reversing the disconnect couplings on the
hoses that are supplied with the attachment if operation is
reversed. See also “NOTE” on next page.
Side Tilt Carriage Operation:
• Lever right .......... tilt right
• Lever left ............ tilt left
NOTE: The auxiliary attachment control lever in models
S/N OA0995 and before have lever movement forward
and back. RIGHT lever movement in the preceding
procedures translates to BACKWARD lever movement on
earlier machines. Likewise, LEFT lever movement
translates to FORWARD.
When the control lever is moved to the left it
will provide hydraulic system pressure to the
male disconnect coupling for the auxiliary
attachment. Hydraulic fluid will return to the
tank through the female disconnect coupling.