SkyTrak 6036 Operation Manual - Manual (Page 77)

Page 71 6036/6036T
ARROW DOWN
TO FILL/CHECK OIL LEVEL
ARROW DOWN TO FILL/CHECK OIL LEVEL
FILL
FILL
OA0432
VENT PLUG
Warning
DO NOT perform service or maintenance on the vehicle
with the engine running. Contact with moving parts can
cause serious injury or death.
Figure 49
MAGNETIC
WHEEL END
DRAIN PLUG
OH0030
Figure 48
AXLE DRAIN PLUG
AXLE
FILL/LEVEL
PLUG
6. Fill axle to level plug hole with 80W90 gear oil (for
temperatures below -15° F (-26° C) 75W gear oil
can be used). Axle capacity is 13 qts. (12,3 ltr).
7. Install fill/level plug.
10. Wheel End Oil
A. Level Check
1. Be sure that arrow on the wheel end housing
(Figure 49) is pointing down. Level the vehicle,
ground the carriage, place the travel select lever
in (N) Neutral, engage the emergency brake
switch and shut off engine.
2. Clean the area around the magnetic drain plug
and remove the plug and check fluid level. Add oil
(refer to “IMPORTANT” statement and tables on
pages 72 & 73) as required to bring level up even
with the plug hole.
3. Clean and install drain plug.