Parking brake switch, Transmission disconnect switch, Operation – Lull 944E-42 Operation Manual User Manual

Page 32

Advertising
background image

30

Model 944E

Origin 3/04

Operation

Parking Brake Switch

The Parking Brake Switch (1) is located on the left side of the front dash and has two
positions:

ENGAGED .................... toggle switch downward

DISENGAGED ...................toggle switch upward

The Parking Brake Switch must be ENGAGED to permit engine starting. A red LED,
on the parking brake switch, will indicate the brake is ENGAGED. The parking brake
engaged light (2) will illuminate on the front dash panel any time the parking brake is
engaged.

The parking brake may be used to stop in an EMERGENCY situation. However, use
caution because the stop will be abrupt and the operator and the load may be jolted
forward unexpectedly.
With boom angles greater than 40 , this switch activates the locked mode of the
Stabil-TRAK system.

Transmission Disconnect Switch

The Transmission Disconnect Switch (3) is located on the left side of the front dash
and has two positions:

ï Push the TOP of the rocker switch in to

DEACTIVATE the transmission disconnect function.

ï Push the BOTTOM of the rocker switch in to

ACTIVATE the transmission disconnect function.

P

P

OS0121

OS1323

5

F

1/2

E

D

OU1340

1

2

3

4

5

6

OH2591

OH2611

Advertising