Eppendorf epMotion 5075 - Manual (Page 12)

Operating instructions
epMotion
® 5075
English (EN)
12
F
Filling volume
Maximum liquid volume of a labware. The epMotion uses the gripper to transport the labware up to the
filling volume. The epMotion aspirates liquid from the labware up to the filling volume. The filling volume is
higher than the working volume.
G
Gripper
Tool that transports labware.
H
Height adapter
Adapter for low labware. The height differences among the labware will be offset to decrease the tool
holder paths, thereby decreasing the run time of the application as well.
HEPA filter
Air filter. The air filter prevents particles such as dust and germs from the environment entering the
epMotion work room.
I
Intermediate labware
Labware that is used to dispense and aspirate liquids during the application.
Intermediate position
Position that is used to dispense and aspirate liquids during the application.
Intermediate vessel
Vessel that is used to dispense and aspirate liquids during the application.
L
Labware
Racks, plates, tips, etc. which are placed on the worktable.
Location
Area on the worktable where the labware is placed.
M
MagSep
System consisting of the magnetic finger module, thermomixer and PrepRack and reagents for nucleic acid
preparation with the epMotion.
MultiCon
epMotion operator panel. You can control your epMotion using the control unit and the epBlue software.