Connector assembly figure 2 -5, Connector assembly figure 3 -5, Connector assembly figure 4 -5 – JLG 680S Service Manual User Manual

Page 305

Advertising
background image

SECTION 7 - BASIC ELECTRICAL INFORMATION & SCHEMATICS

3121234

– JLG Lift –

7-5

3. After all required contacts have been inserted, the

wedge lock must be closed to its locked position.
Release the locking latches by squeezing them
inward (See Figure 7-8.).

4. Slide the wedge lock into the housing until it is flush

with the housing (See Figure 7-9.).

Figure 7-7. Connector Assembly Figure 2

Figure 7-8. Connector Assembly Figure 3

Figure 7-9. Connector Assembly Figure 4

Advertising
See also other documents in the category JLG Special machinery: