2N NetStar Admin manual - Manual (Page 100)

100
SNMP
Notification – here specify the SNMP user for notifications. The SNMP block is
not available yet.
Used relay
Port – here specify the port whose relay is to be closed whenever some of the
conditions defined in the
block is met. Event parameters
Event parameters
The block is accessible if any of the above mentioned options (PBX restart, Port ready,
Port error, etc.) is selected in the
. A survey of available objects Event parameters
related to the event is on the left and a list of objects currently monitored by the given
Event reporter is on the right. Use the arrows to move the objects from one side to the
other.
Example
Let us observe a bundle of GSM virtual ports (see Fig. 1). If all of the GSM virtual ports
are occupied, the "All ports are busy" SMS is sent. When the GSM virtual ports get
released gradually (the observed event is inactive), the "Port %k is free" SMS is sent,
where %k means the list of free virtual ports.