2N Helios IP Automation Manual v2.7 - Manual (Page 30)

30
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Example
The condition is met for inactive time profile 1:
Condition.ProfileState: Profile=1; State=Inactive
Condition.CallState
The block defines the condition to be met in the case of a defined state of CallState
the currently made call.
Parameters
State – define the call state.
Valid values:
idle – call is not being made
connecting call setup in progress –
ringing – ringing in progress
connected – call connected.
Direction – define the call direction.
Valid values:
incoming – incoming calls
outgoing – outgoing calls
any – both directions.
The parameter is optional, the default value is . any
Example
The condition is met for an inactive call:
Condition.CallState: State=Inactive
Condition.InputState
The block defines the condition to be met in case the defined logic level InputState
gets connected to the defined digital input.