2N Helios IP Automation Manual v2.7 - Manual (Page 36)

36
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N Helios IP Force/Safety
®
Outputs
relay1 – relay output on basic unit
output1 – active digital output on basic unit (for board version 555v3 and
higher, active digital output is connected with relay output 1 in 555v2 boards)
relay2 – relay output on additional switch (if installed)
output2 – active digital output on additional switch (if installed)
cr_relay1 – relay output on card reader (if installed)
cr_output1 – active digital output on card reader (if installed)
led_secured – red LED indicator on card reader (if installed)
led_ringing – orange LED indicator of ringing (for
) models with pictograms only
led_connected – blue LED indicator of connected call (for models with
) pictograms only
led_door – green LED indicator of door opening (for models with pictograms
only)
Inputs
tamper – tamper switch (if installed)
cr_input1 – digit input 1 on card reader (if installed)
cr_input2 – digital input 2 on card reader (if installed)
2N Helios IP Uni
®
Outputs
relay1 – relay output on basic unit
Inputs
Unavailable.