Despatch RAD1-42 -2E with Protocol 3 - Manual (Page 9)

RAD1-42-2E Oven Owner ’s Manual A BOUT T HIS M ANUAL
Version 1 9
Copyright © 2012 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
1.5.4. Power
Line voltages may vary in some geographies. If the line voltage for your RAD1-42-2E oven
varies more than 10% from the oven voltage rating, electrical components such as relays and
temperature controls may operate erratically.

If the line voltage is lower than the oven voltage rating, heat-up time may be significantly
longer and motors may overload or run hot.

If the line voltage is higher than the nameplate rating, motors may run hot and draw excessive
amperage.
Warning!
This oven is not designed for use with flammable material. If
your process involves flammable material, see the RFD Class A
series.
†
An oven designed for 240 volts (see oven nameplate) will operate satisfactorily on a minimum of 208
Volts, but will result in 25% reduced heater output. If your power characteristic is lower, contact Despatch
Industries.
Model Volts
†
Amps Hertz Phase KW
RAD1-42-2E 240 30 50/60 1 6-
RAD1-42-2E 208 33.7 50/60 1 6-