JUMO 705020 mTRON T - Analog Input Module, 4-Ch. Operating Manual - Manual (Page 8)

1 Introduction
8
1.2.3 Intended use
The modules described are intended for measuring, control, and automation tasks in an indus-
trial environment, as described in the technical data. Other uses or uses beyond those defined
are not viewed as intended uses.
The modules are built according to the relevant standards and directives as well as the appli-
cable safety regulations. Nevertheless, incorrect use may lead to bodily injury or property dam-
age.
To avoid danger, the modules may only be used:
•
For the intended use
• When in good order and condition
• When taking into account the technical documentation provided
Even if a module is used correctly and according to the intended use, it may still cause appli-
cation-related dangers (e.g. due to missing safety devices or incorrect settings).
1.2.4 Qualification of personnel
This document contains the necessary information for the intended use of the modules to which
it relates.
It is intended for technically qualified personnel who have received special training and have
the appropriate knowledge in the field of automation technology (measuring, process, and con-
trol technology).
The appropriate level of knowledge and the technically fault-free implementation of the safety
information and warnings contained in the technical documentation provided are prerequisites
for risk-free mounting, installation, and startup as well as for ensuring safety when operating
the described modules. Only qualified personnel have the required specialist knowledge to cor-
rectly interpret and implement the safety information and warnings contained in this document
in specific situations.