Kinze 3110 Mounted Planter Rev. 5/14 User Manual
Parts manual, Model 3110 mounted planter
This manual applies to:
Model: 3110 Mounted Planters
2013 to 2014 Production
Record serial number of your planter and date purchased:
Serial Number ___________________________________
Date Purchased __________________________________
Information in this manual was current at time of printing. However, due to Kinze’s ongoing product improvement,
production changes may cause your machine to appear slightly different in detail. Kinze Manufacturing, Inc. reserves
the right to change specifications or design without notice and without incurring obligation to install the same on
machines previously manufactured.
Right hand (R.H.) and left hand (L.H.), as used throughout this manual, are determined by facing in the direction the
machine will travel when in use, unless otherwise stated.
Kinze
®
, the Kinze
®
logo, and EdgeVac
®
are registered trademarks of Kinze Manufacturing, Inc.
MODEL 3110
MOUNTED PLANTER
M0244-02
Rev. 5/14
PARTS MANUAL
Document Outline
- Table of Contents
- Row Unit
- Shank Assembly, Seed Tube, and Depth Adjustment
- Parallel Arms, Mounting Support Plate, and Quick Adjustable Down Force Springs
- 15" Seed Opener Disc Blade/Bearing Assembly and Scrapers
- Gauge Wheels
- Covering Discs/Single Press Wheel
- “V” Closing Wheels
- Drag Closing Attachment
- Hopper Support and Meter Drive
- Seed Hopper and Lid
- Finger Pickup Seed Meter
- Brush-Type Seed Meter
- EdgeVac Seed Meter
- Granular Chemical Hopper and Hopper Panel Extension
- Granular Chemical Meter and Meter Drive
- Granular Chemical Banding Options
- Spring Tooth Incorporator
- Row Unit Mounted No Till Coulter
- Row Unit Mounted Bed Leveler
- Row Unit Mounted Disc Furrower
- Row Unit Mounted Residue Wheel
- Coulter Mounted Residue Wheels
- Frame Mounted Coulter W/Residue Wheels
- EdgeVac System
- Base Machine
- Toolbar Assembly
- Ground Drive Wheel Assembly
- Contact Drive Wheel Assembly
- Seed Rate Transmission and Module Drive Assembly
- Module Drive
- Front Mounted Drive Wheel
- Point Row Clutch
- Point Row Clutch Electrical Components
- Row Marker Assembly, Conventional 6 Row 30"
- Row Marker Assembly, Two-Fold Low Profile 6 Row 36"/38"/40", 8 Row 30", and 8 Row 36"/38"/40"
- Row Marker Spindle/Hub/Blade
- Hydraulics
- Electronics
- Miscellaneous
- Numerical Index