Kinze 3500 Lift and Rotate Planter Rev. 5/14 User Manual
Parts manual, Model 3500 twin-line planter
This manual is applicable to:
Model: 3500 Twin-Line Planters
Serial Number: 902498 to 2014 Production (EdgeVac)
902911 to 2014 Production (Mechanical)
Record the model number and serial number of your planter along with date purchased:
Serial Number ___________________________________
Date Purchased __________________________________
Information in this manual was current at time of printing. However, due to Kinze’s ongoing product improvement,
production changes may cause your machine to appear slightly different in detail. Kinze Manufacturing, Inc. reserves
the right to change specifications or design without notice and without incurring obligation to install the same on
machines previously manufactured.
Right hand (R.H.) and left hand (L.H.), as used throughout this manual, are determined by facing in the direction the
machine will travel when in use, unless otherwise stated.
MODEL 3500
TWIN-LINE PLANTER
PARTS MANUAL
M0240-02
Rev. 5/14
Kinze
®
, the Kinze
®
logo, Twin-Line
®
, Interplant
®
and EdgeVac
®
are registered trademarks of Kinze Manufacturing, Inc.
Document Outline
- Table of Contents
- Row Unit
- Shank Assembly, Seed Tube, and Depth Adjustment
- Parallel Arms, Mounting Support Plate, and Pneumatic Down Pressure Package Option
- Parallel Arms, Mounting Support Plate, and Quick Adjustable Down Force Springs Option
- 15" Seed Opener Disc Blade/Bearing Assembly and Scrapers
- Gauge Wheels
- Covering Discs/Single Press Wheel
- “V” Closing Wheels
- Drag Closing Attachment
- Hopper Support and Meter Drive
- Seed Hopper and Lid
- Finger Pickup Seed Meter
- Brush-Type Seed Meter
- EdgeVac Seed Meter
- Granular Chemical Hopper and Hopper Panel Extension
- Granular Chemical Meter and Meter Drive
- Granular Chemical Banding Options
- Spring Tooth Incorporator
- Row Unit Mounted No Till Coulter
- Row Unit Mounted Disc Furrower
- Row Unit Mounted Residue Wheel
- Coulter Mounted Residue Wheels
- Frame Mounted Coulter W/Residue Wheels
- Interplant
- EdgeVac System
- Digital Vacuum Gauge, Analog Vacuum Gauge, and Vacuum Fan Assembly
- Vacuum Fan Hydraulic Components
- Vacuum Fan Hydraulic Motor Assembly
- Optional Flow Control Needle Valve Kit
- Vacuum Fan Motor Valve Block Assembly (Located Below Vacuum Fan Motor Assembly)
- Manifolds and Distribution Hoses
- PTO Pump Drive and Oil Cooler Option
- Base Machine
- Inner Hitch/Safety Chain
- 2-Point Hitch Option
- Outer Hitch
- Frame Assembly
- Axle/Pivot and Wheel Assembly
- Contact Wheel and Arm Assembly
- Driveline
- Seed Rate Transmission Assembly
- Pneumatic Down Pressure Control Box, Sending Unit, and Harnesses
- Pneumatic Down Pressure Air Compressor, Dual Solenoid Assembly, Tubing, and Fittings
- Row Marker Assembly, Two-Fold Low Profile, 6 Row 30"
- Row Marker Assembly, Two-Fold Low Profile, 8 Row 30"
- Row Marker Spindle/Hub/Blade
- Hydraulics
- Electronics
- Fertilizer
- Double Disc Fertilizer Opener and Mount
- HD Single Disc Fertilizer Opener (Soil Press Wheel)
- HD Single Disc Fertilizer Opener (Blade and Drop Tube)
- Notched Single Disc Fertilizer Opener
- Residue Wheel Attachment for Notched Single Disc Fertilizer Opener
- Depth/Gauge Wheel Attachment for Notched Single Disc Fertilizer Opener
- Dry Fertilizer Transmission Assembly
- Dry Fertilizer Hopper and Mounts
- Liquid Fertilizer Tanks, Saddles, Mounts, Hoses, and Fittings
- Liquid Fertilizer Piston Pump Mounting Brackets and Driveline
- Liquid Fertilizer Piston Pump (Crankcase Assembly) Uses 18 Tooth Sprocket
- Liquid Fertilizer Piston Pump (Cylinder Assembly) Uses 18 Tooth Sprocket
- Liquid Fertilizer Piston Pump Uses 18 Tooth Sprocket
- Liquid Fertilizer Piston Pump Flow Divider
- Liquid Fertilizer Piston Squeeze Pump Mounting Brackets and Driveline
- Liquid Fertilizer Piston Squeeze Pump, 6 Row
- Liquid Fertilizer Piston Squeeze Pump, 8 Row
- Rear Trailer Hitch
- Miscellaneous