Kinze 3600 Lift and Rotate Planter (70 CM) Rev. 6/14 - Manual

This manual applies to: Model: 3600 Twin-Line Planters
- 16 Row 70 CM “Y ” Hitch; 2013 production to 2014 production
Record the model number and serial number of your planter along with date purchased:
Serial Number ___________________________________
Date Purchased __________________________________
Information in this manual was current at time of printing. However, due to Kinze’s ongoing product improvement,
production changes may cause your machine to appear slightly different in detail. Kinze Manufacturing, Inc. reserves
the right to change specifications or design without notice and without incurring obligation to install the same on
machines previously manufactured.
Right hand (R.H.) and left hand (L.H.), as used throughout this manual, are determined by facing in the direction the
machine will travel when in use, unless otherwise stated.
Kinze ® , the Kinze ® logo, Twin-Line ® , Interplant ® , and EdgeVac ® are registered trademarks of Kinze Manufacturing, Inc.
MODEL 3600 TWIN-LINE
EXPORT PLANTER
PARTS MANUAL
M0249-02 Rev. 6/14
Hardware Size / Tool Required
1/4 " = 7/16" 7/16 " = 5/8"
(nut for 7/16" hardware uses 11/16" tool)
3/4 " = 11/8" 11/4" = 17/8"
5/16 " = 1/2" 1/2 " = 3/4" 7/8 " = 15/16" 11/2" = 21/4"
3/8 " = 9/16" 5/8 " = 15/16" 1" = 11/2"