Lenze Global Drive PLC Developer Studio - Manual (Page 35)

Drive PLC
System blocks
2.6 ANALOG1_IO (node number 11)
2−21
L
DrivePLC DE 6.0
2.6.2 Outputs_ANALOG1 (analog output)
You can use this SB as a monitor output. You can output internal analog signals via
·
terminal AOV as voltage signals and
·
terminal AOI as current signals
and use them, e.g. as display or setpoint values for following drives.
AOV
A
AOUT1_nOut_a
Outputs_ANALOG1
C0434 AOI
Fig. 2−11 Outputs_ANALOG1
System variables
Variable Data type Signal type Address Display
code
Display
format
Notes
AOUT1_nOut_a Integer analog %QW11.0 C0434 dec [%] Analog output 1
Function
·
A voltage of 10 V is output at terminal AOV, if the signal on AOUT1_nOut_a = 16384 = 100 %
·
A current of 20 mA is output at terminal AOI, if the signal on AOUT1_nOut_a = 16384 = 100 %
Terminal assignment
Terminal Use Data
AOV Analog output 1 (voltage signal) Level:
Resolution:
Normalisation: −10 V ... +10 V (max. 2 mA)
10 bits + sign
±10 V º ±16384 º ±100 %
AOI Analog output 1 (current signal) Level:
Resolution:
Normalisation: −20 mA ... +20 mA
10 bits + sign
±20 mA º ±16384 º ±100 %
A ^ Internal ground, GND −