MTS Series 793 - Manual (Page 124)

Description Item
Opens an existing parameter set that is associated with the current
station configuration file. The letters next to the parameter set name Open Parameters
indicate the type of parameters that were saved in the parameter set.
For example, Full = All Parameters, L = Limits Parameters, T = Tuning
Parameters, LT = Limits and Tuning, A = Accelerometer Compensation
Parameters, and so forth.
Example: when you open a partial set of parameters, for example
Tuning_Parameters, the current parameter set parameters remain
unchanged and only the tuning parameters are overridden.
Saves any changes to the currently loaded parameter set. Save Parameters
When you rename an existing parameter set, you can save subsets of
the current parameter set based on check-box selections such as Limits, Save Parameters As
Tuning, and/or Calibration parameters. You cannot change any of these
settings for an existing parameter set that has already been named.
The letters next to the parameter set name indicate the type of
parameters that were saved. For example, C = Calibration parameters
and LT = Limits and Tuning parameters.
124 MTS Series 793 Control Software
Station Manager Application