MacDon HC10 for D-Series - Manual (Page 32)

GENERAL INFORMATION
2.2 Specifications
NOTE: Specifications and design are subject to change without notice or obligation to revise previously
sold units.
Item Specification
Frame & Structure
Total Weight (estimated) 1700 lb (770 kg)
Carrier MacDon M150, M155, and M200 Self-Propelled Windrowers
Manual Storage In Windrower Cab
Drives
Main Conditioner 3.16 cu in. (51.83 cc) Hydraulic Motor with 1.29 cu in. (21.14 cc) Flow
Divider
Feed Deck 4.0 cu in. (65 cc) Hydraulic Motor with 921 psi Relief
Connections Flat Faced Quick Attach Couplers – Connect Under Pressure
Conditioner 2500-3000 psi (17.0–20.7 MPa) Normal
Operating
Pressure
Feed Deck 600 psi (4.1 MPa)
Conditioner
Drive Hydraulic Motor To Belt Driven Roll To Open Timing Gear System
Roll Type Intermeshing Steel Bars
Roll Diameter 9.17 in. (233 mm)/6.63 in. (168.4 mm) OD Tube
Roll Length 72 in. (1830 mm)
Header Size 15 ft 20 ft & 25 ft 30 ft 35 ft
Roll Speed 772–977 rpm 720–874 rpm 695–927 rpm 695–868 rpm
Feed Draper Speed 437–553 fpm 407–495 fpm 393–525 fpm 393–491 fpm
Swath Width 36-102 in. (915-2,540 mm)
Forming Shields Header Mounted Tractor Supported Adjustable Forming Shield System
NOTE: To avoid excessive vibration and poor performance, the HC10 Hay Conditioner should not be
attached to single-knife drive headers.
169254
24
Rev. D