Robustel RobustLink - Manual (Page 26)

Robustlink Central Manager User Guide
RT_UG_RobustLink_v.1.0.0 12.12.2013 26 / 43
Confidential
RobustLink’s Web in item “Password” --> click to enable data forwarding in item “Data Forwarding Enable”.
Note:

Address: This address is RobustLink’s IP address, which should be a public IP address or domain name. For
example, 113.113.49.201, the address of USB dongle we use for test in this document.

Port: This port number is the local port number of Agent Server (default port number is 31000), and then
enter this number in this field. If Agent Server’s port number is changed to another port number basing on
the real application, 11021 for example, please enter 11021 in this field. Then go to xampp folder and find
out file “RobustLink_start.bat” -> right click and select “edit” --> change line 7 “RobustLink.exe” to
“RobustLink.exe -p 11021” --> save and quit.

Password: This password is configured in the RobustLink. This item shall be same with the password set in
the RobustLink. Please refer to section 3.3 CONFIGURATION -> Basic Setting -> Device Login Password.

Device ID: This item let you know the default single ID number of M1000 Pro V2, can’t be changed.

Data Forwarding Enable: Click to enable data forwarding, the topology is: data from M1000 Pro V2 (TCP
client) --> RobustLink (TCP server) --> another TCP Client. At this time tab “Connection”--> “Socket
Application” can’t be configure. If you disable this tab, data will not be forwarded via RobustLink, they will
be sent normally as you set in tab “Connection”--> “Socket Application”. But RobustLink still can manage and
monitor the status of M1000 Pro V2. Whether Data Forwarding should be enabled depends on customer
(user). “Data Forwarding Enable” will be enabled for instruction in this document.
11. Go to tab “Status” --> go to item “TCP/IP”, if succeed to establish PPP connection and TCP connection, “PPP
Status” will show “Up” and “TCP Status” will show “Connected”.