Robustel RobustLink - Manual (Page 27)

Robustlink Central Manager User Guide
RT_UG_RobustLink_v.1.0.0 12.12.2013 27 / 43
Confidential
12. Other tabs stay default. Click “Write” to save the settings --> click “Reboot”.
13. Switch to
Normal Mode (data transmission mode).
14. If M1000 Pro V2 login RobustLink successfully, it will show the following diagram.
15. If click the any place of Index 1, it will show the status information of M1000 ProV2.
4.2.2. Forward data from M1000 Pro V2 to RobustLink
1. Open RobustLink, go to tab “CONFIGURATION” --> “Basic Settings” --> click “Enable Data Forwarding”--> click
“Apply” to activate these settings.