Sensaphone 800 - Manual (Page 63)

Chapter 4: Communications Programming
61
the alarm dial-out message or from hearing the Status Report
during an off-site call.
4 .11 .1 Enable/Disable Local Voice Mute
To enable/disable Local Voice Mute:
1. Press SENSOR ON/OFF.
SENSOR
ON/OFF
2. Press MUTE.
CODE
LOCK
MUTE
The Model 800 will say “Mute On” to indicate that Local Voice
Mute is enabled, or “Mute Off” to indicate that it is disabled.
3. Repeat key sequence to switch between enabled or disabled
Local Voice Mute.
4 .12 Voice Repetitions
The Voice Repetitions feature allows programming of the number
of times the alarm message is repeated per phone call during
alarm dial-out.
The maximum repetitions may be set to 10; the default is 3
repetitions.
4 .12 .1 Programming Voice Repetitions
To program Voice Repetitions:
1. Press SET.
SET
2. Press VOICE REPS.
2
VOICE
REPS
The Model 800 will respond: “Enter number.”