Sensaphone 800 - Manual (Page 88)

Sensaphone
®
Model 800 User’s Manual
86
2. Press STATUS. The Model 800 recites the full Status Report;
during this time, you are able to exit the monitored area without
tripping an alarm.
STATUS
5 .13 Designating A Zone As Unused
This feature allows you to mark selected Zones, Power, or
Sound as unused, which will prohibit them from going into
alarm and will also leave them out of the status report. Note
that programming for the selected Zone will be preserved when
the Zone is marked as “unusued” and will not be reconfigured if
automatic Zone configuration is activated.
To designate a Zone as unused:
1. Press the SENSOR ON/OFF key.
SENSOR
ON/OFF
2. Press the SET key.
SET
The 800 will say “Enter Zone Number.”
3. Press the corresponding number of the Zone you wish to mark
as unused.
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
8
CLOCK
3
INTERCALL
TIME
7
RECOGNITION
TIME
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER
1
CALL
DELAY
2
VOICE
REPS
The 800 will respond by saying Zone 1–4, Power, or Sound “Off/
On.” Repeat the key sequence to place the Zone back in use.