Rockwell Automation 20G PowerFlex 755 Drive Embedded EtherNet/IP Adapter - Manual (Page 117)

Rockwell Automation Publication 750COM-UM001E-EN-P - October 2013 117
Viewing the Adapter Web Pages Chapter 8
TCP/IP Configuration Web
Page The TCP/IP Configuration web page provides information about the adapter’s
Ethernet settings and network activities. To view this web page, click the ‘TCP/
IP configuration’ link (highlighted in
Figure 34 ) in the navigation pane.
Figure 34 - Example of TCP/IP Configuration Web Page
Information Description
IP Address IP address of the adapter.
Subnet Mask Subnet mask for the adapter’s network.
Gateway Address Address for the gateway device on the adapter’s network.
BOOTP Shows status for BOOTP, which may be used to configure the adapter’s
network information.
Ethernet Address (MAC) Hardware address for the adapter.
Ethernet Received Packets Number of packets that the adapter has received.
Ethernet Receive Errors Number of receive errors reported by the hardware.
Ethernet Transmitted Packets Number of packets that the adapter has sent.
Ethernet Transmit Errors Number of transmit errors reported by the hardware.
EtherNet/IP Missed I/O Packets Number of I/O connection packets that the adapter did not receive.