Rockwell Automation 1336R REGEN LINE REG - Manual (Page 38)

2–22 Regenerative DC Bus Supply Operation
Adapter Definitions
Figure 2.14 — Adapter Definitions
1203-SG2
1203-SG4 2 3 4 5
2 3
t o p p e d S . 0 0 H z 0 +
Programming Only
HIM
(Adapter 1)
Expansion Options
(Adapter 2)
Digital I/O
— J15/J16 —
(Adapter 0)
1336 REGEN
Converter Control Board
J3
1
9
1 9
POR
T 2
POR
T 1
J6
J16
J15
ES C
SE L
t o p p e d S . 0 0 H z 0 +
Adapter 2
Total Cable Distance Between Each
Device and Converter Must Be
10 Meters (33 ft.) or Less
ESC SEL
F1 F2 F3 F4
Port Expansion Option
(1203-SG2)
GPT or Other Remote Device
Cable Length
in Meters = 10 - X
Cable Length
in Meters = 10 - X
HIM or Other
Remote Device
Length = X Meters
Max Cable
Length = 10 Meters
Serial communication devices such as
the HIM that are connected to the 1336
REGEN Converter are identified by
SCANport serial communications as
adapters. Depending on the
communications options ordered, a
number of different adapters are
available.
When the Converter mounted
Programming Only HIM is supplied, it is
connected as adapter 1 as detailed in
Figure 2.14. Figure 2.14 also shows the
maximum distance allowed between
devices.