Rockwell Automation 1734-SSI POINT I/O Synchronous Serial Interface Absolute Encoder Module User Manual - Manual (Page 39)

1 Publication 1734-UM007D-EN-P - December 2005
Appendix
A
Configure Modules in RSLogix 5000 Software
About This Appendix Read this appendix for information about how to configure your
modules in RSLogix 5000 software, including how to complete entries
on the following dialogs, which are not available for Listen Only
connections.
• Feedback
• Conversion
• Input Registration
• Watch Position
Understand Data,
Connection, and
Communication Formats Before you configure your modules, note the following about Data
formats and Connection types.
• Data format type is Integer.
• Connection types are as follows.
– Data
– Listen Only
Communication formats for adapters are as follows.
• Listen Only - Rack Optimization
• None
• Rack Optimization
Choices for formats for the module depend on the Communication
format for the adapter. See the table for a listing of possible module
Connection formats based on adapter Communication formats.
Adapter Communication Formats Possible Module Connection Formats
Listen Only - Rack Optimization Data (default)
Listen Only
None Data (default)
Listen Only
Rack Optimization Data (default)
Listen Only