Rockwell Automation 6000 PowerFlex Medium Voltage Variable Frequency Drive Installation Instructions - Manual (Page 28)

28 Rockwell Automation Publication 6000-IN006A-EN-P - April 2014
Chapter 2 Drive Mechanical Installation
2. Align the cabinet side sheets together at the holes for the hardware
(see
step 3 ).
Figure 17 - Aligning Cabinets with Fixed-mounted Power Modules (6/6.6 kV shown)
Isolation Transformer Cabinet Power Module/LV Control Cabinet Bypass Cabinet (Optional)
Table 5 - Sidesheet Openings
❶ Front Wireway
❷ Rear Wireway
❸ U Phase Motor Cable
❹ V Phase Motor Cable
❺ W Phase Motor Cable
❻ Ground Bus Connection
❼
Voltage Sensing
Board Cables
❽
Isolation Transformer Secondary
Cables
(1)
(1) The number of Isolation Transformer secondary
cables is dependent on motor voltage class.
• 9 cables per motor phase (27 total) for 3/3.3 kV
•18 cables per motor phase (54 total) of 6/6.6 kV
• 27 cables per motor phase (81 total) for 10 kV
❶
❷
❸
❼
❹
❺
❻
❽
❶
❸
❼
❹
❺
❻
❽
Front Front
❷
SIDE VIEW