Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 132)

Creating a Sample Application File
Chapter 5
5-18
10. The label takes up two lines inside the button. Type the first word,
CONVEYOR. Then use the arrow keys to move the cursor back to the
beginning of the second line and type CONTROLS. Press Enter after
both lines are typed.
11. Choose Quit to close the Button Text menu. Choose Quit again to
close the Text menu. The button is now positioned and labeled. The
next step is to set the function by naming the screen that the button
will call.
12. Open the Screen menu, and choose Go To Screen.
Figure 5.26
The Screen Menu
20058
OBJECT MENU: Move & Size Look Text Screen Utility Exit
OBJECT MENU: Move & Size Look Text Screen Utility Exit
Screen
CONVEYOR
CONTROLS
Go to Screen 1
Quit
M . A . I . N . G . S . C . R . E . E . N .
. . . . . . . . . . . . . . . . . . . . . . . . . .
13. The CONVEYOR CONTROLS screen—which is not yet created—is
screen 2. Type the number 2 beside Go to Screen, and press Enter.
The first “Go To Screen” button is now defined.
14. Choose Quit (or press Esc) to close the Screen menu and return to the
Object menu. Choose Exit from the Object menu, then choose Exit
and Save Object.