Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 148)

Creating a Sample Application File
Chapter 5
5-34
Figure 5.48
The States & Text Menu
20082
OBJECT MENU: Move & Size Look States & Text Address Utility Exit
OBJECT MENU: Move & Size Look States & Text Address Utility Exit States & Text
State 0
State 1
Display States
Outer Text
Quit
4. Choose State 0 to see the State 0 menu, and make the label as
follows:
a. Set Character Width to Double.
b. Set Foreground Color to Red.
c. Set Background Color to White.
Figure 5.49
State 0
20194
State 0
Edit Text
Move Text
Foreground Color Red
Background Color White
Underline No
Blink No
Character Height Single
Character Width Double
Quit
IMPORTANT: PanelBuilder will not let you set the Foreground and
Background Color to the same color. To switch Foreground Color from
white to red and Background Color from red to white, change the
Foreground Color to a temporary color, say yellow, change Background
from red to white, and then change Foreground to red.
d. Choose Edit Text and type the OFF label inside the button. Press
Enter.
e. Choose Quit or press Esc to save the State 0 setting.