Rockwell Automation 1440-VSE02-01RA XM-122 gSE Vibration Module - Manual (Page 65)

55 Publication GMSI10-UM013D-EN-P - May 2010
Chapter
3
Configuration Parameters
This chapter provides a complete listing and description of the XM-122
parameters. The parameters can be viewed and edited using the XM Serial
Configuration Utility software and a personal computer. If the module is
installed on a DeviceNet network, configuring can also be performed using a
network configuration tool such as RSNetWorx (Version 3.0 or later). Refer to
your configuration tool documentation for instructions on configuring a
device.
For information about See page
XM-122 Measurement Modes 56
Channel Transducer Parameters 58
Channel Signal Processing Parameters 60
Measurement Parameters 63
gSE Parameters 69
Tachometer Parameters 71
Alarm Parameters 74
Relay Parameters 78
4-20 mA Output Parameters 82
Triggered Trend Parameters 83
SU/CD Trend Parameters 85
I/O Data Parameters 88
Data Parameters 89
Device Mode Parameters 93
IMPORTANT
The
The appearance and procedure to configure the parameters
may differ in different software.