Rockwell Automation FactoryTalk View Machine Edition Users Guide - Manual (Page 240)

F ACTORY T ALK V IEW M ACHINE E DITION U SER ’ S G UIDE
15-8
• •
•
•
•
2. Double-click About FactoryTalk View ME Station.
3. Click Technical Support.
The telephone number and URL for technical support are shown.
Set up FactoryTalk Diagnostics on the run-time computer
You can set up FactoryTalk Diagnostics on the run-time computer using the FactoryTalk
View ME Station dialog box.
To set up FactoryTalk Diagnostics on the run-time computer
1. In FactoryTalk View ME Station, click Terminal Settings.
2. Double-click Diagnostics Setup.
The FactoryTalk Diagnostics Setup dialog box opens.
3. Set up FactoryTalk Diagnostics, as described on page 10-6.
Set up serial ports for use with KEPServer Enterprise
If you plan to use KEPServer Enterprise and serial communications, you must specify
which COM port to use.
For information about setting up communications in KEPServer Enterprise, see
KEPServer Enterprise Help.
To specify the COM port to use for serial communications
1. In the FactoryTalk View ME Station dialog box, click Terminal Settings.
2. Double-click Networks and Communications.
3. Double-click KEPServer Serial Port ID’s.