Bird Technologies SA-6000EX - Manual (Page 109)

Save and Recall
93
Delete a Saved Trace
You must be in either Measure Match mode or Fault Location mode to
delete a saved trace.
1. Press the Save/Recall softkey
2. Follow the numbered steps in Figure 52, page 93 to select and
delete a saved trace.
Figure 52 Deleting a Saved Trace
Step Action
1 Press the up and down scroll keys to select
an item to delete
2 Press the Delete softkey to delete the
selected item. The message “Are Your
Sure?” appears beside the softkey. Press
the Delete softkey a second time to con-
firm the delete or press the Esc key to can-
cel the delete.
3 Press the Esc key to exit the Save and
Recall list.