Metrohm TiNet 2.5 - Manual (Page 40)

38 • Titrations TiNet 2.5 Compliant
5.2 Sample data
5.2.1 Sample data entry
Every parallel titration has its own Sample data # tab in the main window for
display and entry of sample data.
User Display of the logged-in user. The name will be printed out with
the titration data and stored in the determination.
Remark Enter the remark regarding, e.g. the sample series. It will be
printed out with the titration data and stored in the determina-
tion.
State Display of TiNet state.
Autostart Number of automatic, internal starts. Select this option for se-
ries determinations with a sample changer. The number on the
left counts the starts already performed (current value counter),
the total number of starts which must be performed is on the
right (set counter). Enter the number of samples on the sample
changer in the right counter.
The current value counter can be zeroed with the menu item
Commands, Clear autostart . The counter is also set to 0 if you
answer yes to the question New series? .
Auto start is interrupted when the option is disabled.
Silo Open silo memory for sample data (see section 5.2.2). If the
Silo option is enabled, the sample data are transferred for each
determination from the silo and displayed under Sample data .
This option must be enabled in order to edit the silo memory.