Metrohm tiamo 2.2 Manual - Manual (Page 1142)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1128 ￭￭￭￭￭￭￭￭ tiamo 2.2
Selection 1 | 2
Default value 1
Pump(s)
Selection of the pump that is to be actuated. The pump(s) can either be built-
in or externally connected. With 1+2 both pumps at the selected tower will
be switched at the same time.
Selection 1 | 2 | 1+2
Default value 1
1
Pump 1 is actuated.
2
Pump 2 is actuated.
1+2
Both pumps at the selected tower will be switched at the same time.
Actions
Selection Switch on | Switch off | Duration
Default value Switch on
Switch on
Switch on the pump(s).
Switch off
Switch off the pump(s).
Duration
Switch on the pump(s) for a particular period.
Range 0 ... 9999.9
Default value 10.0
Selection s | min
Default value s
5.6.7.6 STIR
5.6.7.6.1 STIR - Overview
Dialog window: Method ▶ STIR ▶ Properties... ▶ STIR - 'Command name'
Command for controlling a connected stirrer.
Devices
This command can be executed with the following devices:
Titrando: 808, 809, 835, 836, 841, 842, 851, 852, 857, 859, 888, 890,
901, 902, 904, 905, 906, 907
Titrino: 751, 758, 784, 785, 795, 798, 799
Conductometer: 856