Banner SureCross DX80 Wireless Networks - Manual (Page 41)

Host System
Gateway
Node 1
Node 2
9.5 Serial Communication Configuration for DX83s
The DX83 Ethernet Bridge uses jumpers to select between RS-485 and RS-232 communications.
Install the four jumpers across the two top rows of pins for
RS-485 and across the bottom two rows of pins for RS-232.
Communication pins
9.6 Restoring Factory Default Settings
Restoring the factory default settings resets the settings for the IP address, the root login and root password, the HTTP
port setting, and a few other communication settings.
Restoring the factory default settings resets the settings for:
Parameter Default Setting
IP Address 192.168.0.1
Root Login root
Root Password sxi
HTTP Port 80
Modbus Server Port 502
Telnet Port 23
EtherNet/IP Protocol Disabled
Host Controller Systems
41