Kenco Engineering SmartSonic Transmitter (Remote) - Manual (Page 10)

Page 10
Accessing the Main Menu
This section describes the procedure for accessing the SmartSonic Main Menu. The main screen (see Page #7) is
accessed as follows:
Press / Action Display Description
Connect SmartSonic to power supply See Wiring Section
The SmartSonic takes several seconds to
warm-up. During this time various characters
will turn on and off, and the Tank Graphic will
cycle
and simultaneously
This is the password display
and
Use to enter the password (716) in place of
(000). BACK and NEXT will change the vlue of
the digit (0-9). ENT steps to the next digit; ESC
steps to the previous digit.
Single Sensor (only available option).
Flashes for 5
seconds, then is
displayed
Press ENT.
Flashes for 5
seconds The main screen (Page #7) is now displayed.
Main Screen Functions
Indication modes
Numerical area
Measurement
units
Relays
Flow
measurements
Application types
20 mA/4 mA
levels
Tank graphic
Tank height
Sensor offset
Scan distance
mode indicator
Operation
modes
Clear scan distance