Amico SSM Monitor Arms (Side to Side) - Manual (Page 18)

15 Amico Accessories
1
2
3
4
DETAIL 1
SCALE 1 : 5
DETAIL 2
SCALE 1 : 5
DETAIL 3
SCALE 1 : 5
DETAIL 4
SCALE 1 : 5
Section 4: Adjustments
WARNING: Both arms have a 180° rotation.
Ensure proper clearance around the arm(s) to avoid
collision
NOTE: If the arm becomes difficult to rotate, or too
loose, please contact Amico Accessories: 1-877-264-
2697
Single Arm Rotation:
To rotate the arm, simply push on the side of the arm or the mounted monitor in the direction desired. (Figure 1)
Dual Arm Rotation:
To rotate at the end point (near wall), push on the side of the extension arm, near the mid-way point (Figure 2) . To
rotate at the midway point, hold the extension arm with one hand and push on the side of the SSM arm with the
mounted monitor in the direction desired.
(Figure 3)
To rotate at second arm
second arm rotated
(Figure 3)
first arm rotated
To rotate at first arm
(Figure 2)
arm rotated
(Figure 1)
End point
(Figure 4)
Midway Point
End point
(Figure 5)
Rotation (SSM Side To Side)