Dell POWEREDGE M1000E - Manual (Page 440)

412 Fabric OS Command Reference
53-1002746-01
fwClassInit
2
fwClassInit
Initializes all classes under Fabric Watch.
SYNOPSIS fwclassinit
DESCRIPTION Use this command to initialize all classes under Fabric Watch. The command should only be used after
installing a Fabric Watch license to start licensed Fabric Watch classes. Refer to the Fabric Watch
Administrator's Guide for a list of supported Fabric Watch classes.
NOTES This command requires a Fabric Watch license.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS None
EXAMPLES To initialize all classes under Fabric Watch:
switch:admin> fwclassinit
fwClassInit: Fabric Watch is updating...
fwClassInit: Fabric Watch has been updated.
SEE ALSO fwConfigReload , fwHelp , portFencing , portThConfig , thConfig , sysMonitor