Dell S320wi Projector - Manual (Page 132)

Guiding Signals
Control Buttons Indicator
Projector
Status
Description
Power
TEMP
(Amber)
LAMP
(Amber)
Standby mode Projector in Standby mode. Ready to
power on.
BLUE
Flashing
OFF OFF
Warming up
mode
Projector takes some time to warm up
and power on.
BLUE OFF OFF
Lamp on Projector in Normal mode, ready to
display an image.
Note: The OSD menu is not
accessed.
BLUE
BLUE
OFF
OFF
OFF
OFF Cooling mode
Cooling before
Power Saving
mode
Projector is cooling to shutdown.
The projector takes 60 seconds to cool
down before entering Power Saving
mode.
AMBER OFF OFF
Projector
overheated
Air vents might be blocked or ambient
temperature may be above 35 ºC. The
projector automatically shuts down.
Ensure that the air vents are not blocked OFF AMBER OFF
and that the ambient temperature is
within operational range. If the problem
persists, contact Dell.
Lamp driver
overheated
The lamp driver is overheated. The air
vents may be blocked. The projector
automatically shuts down. Turn the
display on again after the projector cools
down. If the problem persists, contact
Dell.
Fan breakdown One of the fans has failed. The projector
automatically shuts down. If the problem
persists, contact Dell.
Lamp driver
breakdown
The lamp driver has failed. The projector
automatically shuts down. Unplug the
power cord after three minutes and then
turn the display on again. If this problem
persists, contact Dell.
Color Wheel
breakdown
Color wheel cannot start. The projector
has failed and the projector
automatically shuts down. Unplug the
power cord after three minutes and then
turn on the projector. If this problem
persists, contact Dell.
Lamp failure Lamp is defective. Replace the lamp.
Fault - DC
supply (+12V)
Power supply has been interrupted. The
projector automatically shuts down.
Unplug the power cord after three
minutes and then turn on the projector.
If this problem persists, contact Dell.
Lamp module
connection
failed
Lamp module connection may be
disrupted. Check the lamp module and
ensure that it is properly installed. If the
problem persists, contact Dell.
AMBER
OFF
AMBER
Flashing
BLUE
OFF
AMBER
Flashing
OFF
AMBER
AMBER
Flashing
OFF
AMBER
Flashing
OFF
AMBER
OFF
OFF
OFF
AMBER
Flashing
AMBER
Flashing
AMBER
AMBER
AMBER
Flashing
132 Troubleshooting Your Projector