Dell S320wi Projector - Manual (Page 61)

A UTO S OURCE —Select Off (the default) to lock the current input signal. If
you press the Source button when the Auto Source mode is set to Off, you
can manually select the input signal. Select On to auto detect the available
input signals. If you press the Source button when the projector is on, it
automatically finds the next available input signal.
A
UTO K EYSTONE —Select On to automatically adjust image distortion caused
by tilting the projector.
P
ROJECTOR M ODE —Allows you to select the projector mode, depending upon
how the projector is mounted.
•Rear Projection-Desktop — The projector reverses the image so that you
can project from behind a translucent screen.
•Rear Projection-Wall Mount — The projector reverses and turns the
image upside down. You can project from behind a translucent screen with
a wall-mounted projection.
•Front Projection-Desktop — This is the default option.
•Front Projection-Wall Mount — The projector turns the image upside
down for wall-mounted projection.
S
PEAKER —Select On to enable the speaker. Select Off to the disable
speaker.
C
LOSED C APTION —Select On to enable close caption and activate the closed
caption menu. Select appropriate closed caption options: CC1, CC2, CC3,
and CC4.
NOTE:
1. Closed caption option is available for NTSC only.
2. Closed captioning can only be enabled via S-Video and Composite
Video inputs.
S TARTUP S CREEN —Default is Dell logo as wallpaper. You can also select
Capture Screen option to capture the screen display. The following
message appears on the screen.
NOTE: To capture a full image, ensure that the input signal connected
to the projector is at 1024 x 768 resolution.
T EST P ATTERN —Test Pattern is used to test focus and resolution.
You can enable or disable the Test Pattern by selecting Off, 1, or 2. You can
also invoke the Test Pattern 1 by pressing and holding down and
Using Your Projector 61