Dell PowerEdge M520 (for PE VRTX) - Manual (Page 90)

Error Code Message Information
Details The IOM module performance may be impacted.
Action If the issue persists, see Getting Help .
HWC6000
Message The < name > controller is offline.
Details Information and status from the controller is unavailable.
Action Remove and reapply input power. If the issue persists, see Getting
Help .
HWC6002
Message The < name > controller is stuck in boot mode.
Details Information and status from the controller is unavailable.
Action Remove and reapply input power. If the issue persists, see Getting
Help .
HWC6003
Message The < name > controller is booting.
HWC6004
Message Cannot communicate with < name > controller.
Details Information and status from the controller is unavailable.
Action Remove and reapply input power. If the issue persists, see Getting
Help .
HWC7002
Message Server < number > health changed to a warning state from a normal
state.
Details Server < number > health changed to a warning state from a normal
state.
Action Review System Log or front panel for additional information.
HWC7004
Message Server < number > health changed to a critical state from either a
normal or warning state.
Details Server < number > health changed to a warning state from a normal
state.
Action Review System Log or front panel for additional information.
HWC7006
Message Server < number > health changed to a nonrecoverable state from a
less severe state.
Details Server < number > health changed to a warning state from a normal
state.
90