Roadi RDT51 - Manual (Page 38)

OWNER S MANUAL
,
OBD2 Car Scanner
34
CHECK
6.6 Power
Internal Battery Power
The scan tool can be inserted a 9V cell battery that provides power for
off-car reviewing and analysis. Press the power key to turn on the scan
tool. When the icon appears, replace the battery as instructed in Battery
Replacement on paragraph 3.10.
If the scan tool is stored for a long period of time, remove batteries to
prevent battery leakage from damaging battery compartment.
External Power
External power of the scan tool is provided via the vehicle Data Link
Connector (DLC). Just follow the steps below to turn on the scan tool:
1). Connect the OBD II Cable to scan tool.
2). Find DLC on vehicle.
A plastic DLC cover may be found for some vehicles and you need to
remove it before plugging the OBD2 cable.
3). Plug OBD II cable to the vehicle's DLC.
6.7 DTC Lookup
The DTC Lookup function is used to search for definitions of DTCs stored
in built-in DTC library.
1). From Main Menu, use
UP/DOWN scroll button to select DTC Lookup
and press
ENTER button.
The number "x/x" to the rig ht indicates total number of items under this
menu and sequence of hig hlig hted item.
Main Menu
=======================
Diagnostics
DTC Lookup
Review Data
System Setup
Tool Information