Roadi RDT51 - Manual (Page 60)

OWNER S MANUAL
,
OBD2 Car Scanner
56
CHECK
Manual Trigger…
=============================
Record Data…
=========================1/3
Pick Trigger Mode…
=========================1/2
Recording Complete Data Set
2). To record complete set of live data, use
UP/DOWN scroll button to
select Complete Data Set from Record Data menu and press
ENTER
button.
3). Use
UP/DOWN scroll button to select a trigger mode and press
ENTER button.
If data from previously tested vehicle is not erased, data from current
test will be stored in a temporary cache. Following screen shows when
Manual Trigger is selected:
Ready to record!
Press [ENTER] to
start recording…
Press [ESC] to exit
Or following screen shows when DTC Trigger is selected:
Complete Data Set
Custom Data Set
Unit of Measure
Manual Trigger
DTC Trigger