Two Brothers Racing Can-Am Spyder RT User Manual
V.a.l.e, Spyder rt
V.A.L.E.
V a r i a b l e a x i s l o c k i n g e x h a u s t
TM
IMPORTANT - PLEASE READ CAREFULLY
Installation Instructions
7. Install supplied TBR muffler hanger bracket using the
OEM bolt and nut.
8. Loosely attach TBR slip-tube to muffler using the supplied
2-piece X-ring with the supplied (4) 6x20mm socket head
cap screws and lock washers.
1. Make sure the bike is completely cool before starting the
installation. Make sure the bikes parking brake is set.
2. Remove OEM heat shield.
3. Remove OEM muffler joint.
4. Remove OEM muffler mounting bolt, this bolt will
be re-used.
5. Remove OEM muffler assembly.
6. Remove OEM muffler joint gasket.
2010 Can-Am
SPYDER RT
V.A.L.E.™ Slip-on Exhaust System with M-5 Canister
Part # 005-2830419V / 005-2830420V
We recommend that this performance part be installed by a qualified
motorcycle technician. If you have any doubts as to your ability to install this
performance part, please consult with your local motorcycle dealer. Read all
instructions first before starting installation. Make sure the motorcycle and
exhaust system are completely cool before starting the installation. Be sure
to save all stock components for possible use later.
**This product has not been tested with all available accessories and some
items may cause excessive heat. Excessive heat may cause damage to your
vehicle. Two Brothers Racing will not be responsible for damaged parts.